Required Tools And Materials - Siemens RUGGEDCOM RST2228 Installation Manual

Chapter 1
Introduction
USB Console Port
Alarm Indicator LED
Removable Media
Failsafe Alarm Relay
Power Supply Terminal Block
Chassis Ground Terminal
Section 1.3

Required Tools and Materials

The following tools and materials are required to install the RUGGEDCOM RST2228:
AC/DC power cord
Lightning protector
Flathead screwdriver
Torx T10 screwdriver
Phillips screwdriver
8 x M6 or #10-32 screws
8 x M6 or #10-32 screws
Braided or equivalent ground wire
4
LED
PS1/PS2
The serial console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial
console port, refer to
The alarm indicator LED illuminates when an alarm condition exists. Pressing the Alarm Cut-
Off (ACO) button clears the alarm(s).
The device features sockets for up to four SFP/SFP+ transceivers and slots for up to six
removable media modules. For more information, refer to
Latches to default state when a power disruption or other alarm condition occurs. For more
information, refer to:
• Section 2.4, "Connecting the Failsafe Alarm Relay"
• Section 5.2, "Failsafe Alarm Relay Specifications"
A pluggable terminal block. For more information, refer to:
• Section 2.5, "Connecting Power"
• Section 5.1, "Power Supply Specifications"
Protects the device from power surges and accumulated static electricity. For information
about grounding the device, refer to
Tools/Materials
State
Off No active alarm conditions exist
Solid The power source is supplying power to the device
Off The power source is not supplying power to the device
Section 3.1, "Connecting to the
Section 2.5, "Connecting
For connecting power to the device. For the required. To determine
the proper wire gage, refer to
Specifications".
For protecting the device from harmful electrical strikes.
For removing or installing modules and terminal blocks.
For removing or installing modules.
For removing or installing terminal blocks.
For mounting the device to a panel.
For mounting the device to a rack.
For grounding the device to safety Earth.
RUGGEDCOM RST2228
Installation Guide
Description
Device".
Chapter 4, Communication
Power".
Purpose
Section 5.1, "Power Supply
Required Tools and Materials
Ports.