8.8 Configuration tools
8.8.1 Connect PC to panel
Building Technologies
Fire safety
Two tools are used to configure FC360 system easily and conveniently:
●
FC360 Panel Configurator
●
FC360 Desktop Editor
The below table describes the functions of the tools:
Tools
FC360 Panel Configurator
FC360 Desktop Editor
'FC360 Desktop Editor' is available at
www.siemens.com/buildingtechnologies/Cerberus-fit.
'FC360 Panel Configurator' is integrated in the panel.
Detailed information about tools operation is available in document A6V10450595.
See chapter 'Applicable documents [➙ 9]'.
A PC is required for most commissioning, maintenance and repair work. The figure
below shows the connection between PC and panel.
X26
X26
Terminal of PC connection
1
Cable, type CAT 5 or CAT 7, crossover, max. 100 m
WARNING
Risk to system integrity through unauthorized access
Malfunction and not ready for alarm activation
●
Access to the station only with direct PC connection according to document
A6V10421795 and A6V10450595.
●
Connection to networks is expressly prohibited.
Adobe Flash Player is required on PC.
Configuration tools
Functions
●
Online configuration
●
Apply configuration
●
Backup configuration
●
Restore configuration
●
Reset alarm counter
●
Synchronize system time
●
Update firmware
●
Modify configuration file
1 1
Engineering
8
95 | 124
A6V10421795_en--_g
2016-11-18