Table of Contents
Advertisement
1.4 History of changes
Building Technologies
Fire safety
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document's history of changes:
Version
Edition date
g
2016-11-18
f
2016-08-23
e
2016-08-18
d
2016-07-22
c
2016-04-08
b
2016-02-23
a
2015-06-08
About this document
History of changes
Brief description
Add information of mainboard FCM3601-Z1 and
door incl. PMI FHD3601-Z1 in chapter 5.12 and
chapter 12.
Change default setting of relay 3 in chapter 5.9
and 5.5.
Add 'Intended use' sub-chapter in chapter 2.1.
Some minor editorial changes.
Add technical information on output card (4M)
concerning creeping open / creeping short when
the output is configured as RT fault in chapter
5.11.4.
Add technical information on output card (4M)
concerning creeping open / creeping short in
chapter 3.4.2 and 5.11.4.
Completely update the document.
Add RS485 / RS232 communication parameters
in chapter 5.11.5.
Change name of 'FC360 Tool' to 'FC360 Panel
Configurator'.
Change name of 'FC360 Editor' to 'FC360
Desktop Editor'.
Change password of access level 3.1 in chapter
6.1.
Add information of updating firmware of FT2010
/ FT2011 / FDUL221 in chapter 9.7.
Add sticker information in chapter 5.2.
Add description to quit replace mode in chapter
8.3.4.3.
Add how to adjust brightness in chapter 11.2.
Update information in chapter 3.4.2 and chapter
5.8 about the total output current of configurable
IOs and Aux power output is max. 0.2 A.
Add access level 3.1 in chapter 6.1.
Add action of P2 line overload in chapter 11.2.
Add 'Shielded cable is required.' for RS485
application in chapter 5.11.5.
First version
1
11 | 124
A6V10421795_en--_g
2016-11-18
Advertisement
Table of Contents
