Configuration; Check List: Configuration; Procedure For Configuration - Siemens Second Wind Function Manual

Configuration

4.1

Check list: Configuration

Configuration
Go through the following steps for configuration.
Checklist for configuration
Step
STEP 7, HW Config:
Integrating the HMI device in the plant
configuration
Setting the PROFIsafe parameters
S7 Distributed Safety:
Call the F-FBs in the safety program that are
necessary for the HMI device
WinCC flexible:
Configure a unique project ID, the effective ranges,
and the desired objects
Setting the HMI device parameters
4.2

Procedure for configuration

Tools
For the use of a Mobile Panel 277F IWLAN you have to use various tools, which you can call
centrally on the configuration computer via the SIMATIC Manager:
● The STEP 7 hardware configuration "HW Config"
● The S7 Distributed Safety option pack
● WinCC flexible 2007 ES
Fail-safe operation of the Mobile Panel 277F IWLAN
Function Manual, 08/2008, 6AV6691-1FQ01-2AB0
Information
Assigning parameters for
communication between the HMI
device and the controller (Page 55)
Using F-FBs (Page 60)
Configuration overview (Page 72)
HMI device operating instructions,
Appendix
4
Check
53