Configuring Settings Online; Configuring Settings Offline - Mitsubishi Electric MELSEC iQ-F Series User Manual

Configuring settings online

When setting EtherNet/IP devices online, the following conditions must be met.
• The FX5-ENET/IP and EtherNet/IP device are connected to the network.
• A name has been set to the EtherNet/IP device, and the name does not duplicate the name of other EtherNet/IP devices.
• An IP address has been set to the EtherNet/IP device, and the IP address does not duplicate the IP addresses of other
EtherNet/IP devices.
Setting procedure
1.
Add the EtherNet/IP devices to be used to "Device Library". (Page 98 Adding the EDS file)
2.
Detect the EtherNet/IP devices on the network. (Page 67 Network Detection)
Select the [Network Detection] tab  [Network]  [Read Network Configuration]
3.
Add the detected EtherNet/IP devices to the network configuration settings.
[When EtherNet/IP devices are added one by one]
Select the EtherNet/IP device in "Network Detection"  [Network]  [Insert in Configuration]
[When EtherNet/IP devices are added as a batch]
Select the [Network Detection] tab  [Network]  [Insert and Replace All]

Configuring settings offline

When settings are configured offline, the EtherNet/IP communication settings can be configured without the FX5-ENET/IP
and EtherNet/IP devices.
However, check the names of the EtherNet/IP devices used and the network configuration in advance.
Setting procedure
1.
Add the EtherNet/IP devices to be used to "Device Library". (Page 98 Adding the EDS file)
2.
Add the EtherNet/IP devices to the network configuration settings.
Select the EtherNet/IP device in "Device Library".  [Library]  [Insert in Configuration]
8 EtherNet/IP Configuration Tool for FX5-ENET/IP
8.2 Procedure for Registering EtherNet/IP Devices
8
101