2
PARAMETER SETTINGS
This chapter describes how to set the parameters of the I/O module with diagnostic functions.
Setting parameters with the engineering tool here eliminates the need to program them.
2.1
Basic Settings
Setting procedure
Open "Basic setting" of the engineering tool.
1.
Start Module Parameter.
[Navigation window] [Parameter] [Module Information] Target module [Module Parameter] [Basic setting]
2.
Double-click on the item to be changed and enter a setting value.
• Item where a value is selected from a drop-down list
Click the [] button of the item to be set to display a drop-down list. Select an item.
• Item where a value is entered into a text box
Double-click on the item to be set and enter a numerical value.
2 PARAMETER SETTINGS
2.1 Basic Settings
2
55