Application Settings - Mitsubishi Electric MELSEC iQ-F Series User Manual

7.4

Application Settings

Set the following parameters when the functions of the general-purpose Ethernet will be used on FX5-ENET/IP.
Security
Set the security function.
Item
IP Filter IP Filter
Settings
IP Filter Settings
■IP Filter Settings
Set the IP address for which the IP filter function will be used.
Double-click <Detailed Setting> of the "IP Filter Settings".
Item
Access from IP address below
Range Setting
IP Address
IP Address Excluded from Range
Description
Set whether to enable the IP filter function.
Set the IP address to be allowed or denied. (Page 53)
Description
Select whether to allow or deny the access from the specified IP addresses.
Select this item when specifying the IP addresses by range.
Set the IP address to be allowed or denied.
When selecting "Range Setting", enter the start IP address (left field) and
end IP address (right field) of the range.
When selecting "Range Setting", set the IP address to be excluded from the
set range.
Up to 32 IP addresses can be set.
Setting range
• Not Use
• Use
(Default: Not Use)

Setting range
• Allow
• Deny
(Default: Allow)

• Blank
• 0.0.0.1 to 223.255.255.254
(Default: Blank)
• Blank
• 0.0.0.1 to 223.255.255.254
(Default: Blank)
7 PARAMETER SETTINGS
7.4 Application Settings
7
53