Editing Recorded Tracks On The Md Before Editing; Erasing Recordings (Erase Function) - Sony ZS-M30 Operating Instructions Manual

Editing recorded
tracks on the MD
Before editing
On the MD, track marks are inserted
between the tracks. You can edit recorded
tracks by adding or erasing the track marks.
The position of the track marks to be added
are different depending on the type of
recording or recording conditions as shown
in the following table.
The position of the track marks
to be added
The type of The position of the
recording track marks to be
added
Recording a whole The same positions on the
CD (page 6)
source CD
Recording from a
• The same positions on
CD using REC•REC
MODE button (page
• The position where you
22)
• The position where you
Recording from the
• When there is no sound
radio or other
components connected
to the player (pages 21
and 43)
• The positions where you
• The positions where you
You can add or erase track marks after
recording. When you record, track marks
may be added to the positions you do not
want. If that happens, change the positions
of the track marks to those you want.
the source CD
pause recording
press REC•REC MODE
input or a soft sound
continues during
recording for more than
2 seconds
pause recording
press REC•REC MODE
Erasing recordings
(Erase Function)
You can quickly erase the recorded tracks or
unnecessary portion in the track. Unlike a
cassette-corder, blank portion will not
remain after erasure.
Here are three options to erase recordings:
• Erasing a single track
• Erasing all tracks on an MD
• Erasing a portion of a track
MD x
Erasing a single track
You can erase a whole track quickly. When
you erase a track, the total number of tracks
on the MD decreases by one and all tracks
following the erased one are renumbered.
1
Play the track you want to erase.
2
Press EDIT repeatedly until "Track
Erase" appears in the display.
NO
CANCEL
YES
ENTER
EDIT
continued
GB
25