The Radio; Presetting Radio Stations - Sony ZS-M30 Operating Instructions Manual

The Radio

Presetting radio
stations
You can store radio stations into the player's
memory. You can preset up to 40 stations,
20 for FM and 10 each for MW and LW in
any order.
RADIO
BAND
AUTO PRESET
1
Press RADIO BAND•AUTO PRESET
until the band you want appears in the
display.
2
Hold down RADIO BAND•AUTO
PRESET until "Auto Preset" flashes in
the display.
3
Press YES•ENTER.
The stations are stored in memory from
the lower frequencies (from the preset
number 1, in numerical order) as long as
the station has a signal strong enough.
When you've done presetting, the
station stored in the preset number 1
will be tuned in automatically.
If a station cannot be preset
automatically
You need to preset a station with a weak
signal manually. Also, when you want to
replace preset stations with a new one,
proceed as follows:
1 Press RADIO BAND•AUTO PRESET
2 Press TUNE + or TUNE – repeatedly until
YES
ENTER
3 Select the preset number you want to
Jog dial
4 Press YES•ENTER.
On the remote
1 Press BAND until the band you want appears in
2 Press TUNE + or – until you tune in the station
3 Hold down the number/character button that you
EDIT
until the band you want appears in the
display.
you tune in the station you want, and then,
hold down YES•ENTER for 2 seconds.
preset the new station on by turning the
jog dial.
The new station replaces the old one.
the display.
you want.
want to preset the new station on for 2 seconds.
To select the preset number over 10, press >10
first, then the corresponding number buttons.
You need to hold down the last number button to
enter for about 2 seconds. (Example: To select
12, press >10 and 1 first, then hold down 2 for
about 2 seconds.)
GB
17