Playing an MD
1
For hookup instructions, see pages 64 - 67.
1
Insert the MD (direct power-on).
With the label
side up
Insert in the direction of
the arrow
2
Press MD
u
remote).
The player plays all the tracks
once.
Listening to the radio
2
For hookup instructions, see pages 64 - 67.
1
Press RADIO BAND until the
band you want appears in the
display (direct power-on).
2
Hold down TUNE + or TUNE –
until the frequency digits begin to
change in the display.
The player automatically scans
the radio frequencies and stops
when it finds a clear station.
If you can't tune in a station,
press TUNE + or TUNE –
repeatedly to change the
frequency step by step.
2
Display
After "TOC Reading" is
displayed, the disc name
will be displayed if it is
labelled.
(MD N on the
Track name is displayed
m
Track number
Playing time
1
Display
"FM1", "FM2", "MW" or
"LW" appears
Indicates an FM stereo
broadcast
Tip
Next time you want to
listen to a MD, just press
MD u. The player
turns on automatically
and starts playing the
Tips
• The "FM1" and "FM2"
bands have the same
functions. You can store
the stations you want
separately in "FM1" and
"FM2" (page 22).
• If the FM broadcast is
noisy, press MONO/
ST•REPEAT (MODE on
the remote) until
"Mono" appears in the
display and radio will
play in monaural.
• N ext time you want to
listen to the radio, just
press RADIO BAND.
The player turns on
automatically and starts
playing the previous
station.
– 8 –
Use these buttons for additional operations
. >
MD u
MD x
.
VOLUME –, +
OPERATE
Z
To
Press
adjust the volume
VOLUME +, –
(VOL +, – on the remote)
stop playback
MD x
MD u (MD X on the
pause playback
remote)
MD.
Press the button again to
resume play after pause.
go to the next track
>
go back to the previous track
.
remove the MD
Z
turn on/off the player
O P E R AT E
Use these buttons for additional operations
OPERATE
VOLUME –, +
MONO/ST
REPEAT
To
Press
adjust the volume
VOLUME +, –
(VOL +, – on the remote)
turn on/off the radio
O P E R AT E
To improve broadcast reception
FM:
Set the FM ANTENNA SELECTOR at the rear of the
player to "
" (telescopic aerial).
Reorient the aerial for FM.
MW/LW:
Keep the MW/LW
loop aerial as far as possible from
the player and reorient it.
If the broadcast is still noisy, connect the external
aerial (page 67).