A Note On Multiple Select Option Lists; How To Enter Numeric Data - Siemens SITRANS F FUH1010 Series Operating Instructions Manual

Section 1
Place Magnetic
Wand here to
select Diesel
Fuel.
Select Liquid
:Diesel Fuel

A Note on Multiple Select Option Lists

Certain option lists allow you to make more than one selection. For example, the [Datalogger
Data] option list allows you to select any or all of the available data items for your reports. As
previously described, you can use
used to select an item, the cursor moves to the next item in the option list. If you use
return to the item that you selected, you will see that an asterisk (
to show that it is selected. Unlike option lists that offer a single selection, the cursor remains
within the option list so that you can make other selections. To deselect a previously selected
item, scroll to that item (marked by an asterisk) and then use
After selecting all the desired items, use

How To Enter Numeric Data

This section shows how to edit a numeric menu cell. The following example uses the [Pipe OD]
menu cell. The left-hand figure below shows the [Pipe OD] menu cell. Notice that the second
line shows the current outer diameter value: [0.500]. (The "greater than" symbol placed before
the parameter indicates that it is the current selection.) This example explains how to change
the pipe outer diameter to 4.500.
Place magnetic
wand here to
activate numeric
entry.
Pipe OD (in)
> 0.500
Estimated Vs m/s
> 1377
and to move the cursor through the list. However, when
to leave a multiple select option list.
Pipe OD (in)
=_ 0.500
1-16
1010BXFM-3
After selecting
[Diesel Fuel] the
menu moves
to the next cell.
* ) appears next to that item
.
The first position allows
you to change the
mathematical sign.
to