Inserting And Ejecting A Floppy Disk - Fujitsu PRIMERGY BX600 S3 Hardware Manual

3.4.2 Inserting and Ejecting a Floppy Disk

■ Inserting the Floppy Disk
1
Use the display/USB expansion cable and connect a floppy disk drive to the
Server Blade.
→"Start Guide"
2
Insert the floppy disk drive from the side with the shutter.
After clicking into place, the floppy disk
eject button pops out.
■ Ejecting the Floppy Disk
Make sure that the floppy disk access LED is off. Press the floppy disk eject button.
The floppy disk is ejected.
• Do not eject the floppy disk while the floppy disk access LED is on. The data stored on the
floppy disk may be damaged.
PRIMERGY BX600 S3 Blade Server System Unit Hardware Guide
Face the label up
Floppy disk
access LED
OFF
Floppy disk eject button
Shutter
Floppy disk
eject button
27