Cleaning The Floppy Disk Drive; Optional Devices - Fujitsu PRIMERGY BX600 S3 Hardware Manual

Be careful when removing components such as CPUs, memory modules, or hard disk units. Be sure
to install parts and cables in the original position.
Leaving dust on the server can cause failure. Be sure to remove any dust from the server.

5.1.3 Cleaning the Floppy Disk Drive

Prolonged use of the floppy disk drive accumulates dust on the device head (the part which reads/writes
data). A dirty head can impair the ability to read/write data to/from a floppy disk correctly. Clean the
head once every three months.

5.1.4 Optional Devices

For details about cleaning optional devices, refer to the each optional device manual.
PRIMERGY BX600 S3 Blade Server System Unit Hardware Guide
63