National Instruments PCI E Series Programmer's Manual page 74

© National Instruments Corporation
8. The function
AI_Board_Environmentalize
for any external multiplexers.
Joint_Reset_Register
AI configuration start = 1;
AI_Mode_2_Register
External mux present = 0;
Joint_Reset_Register
AI configuration start = 0;
AI configuration end = 1;
9. Call
AI_Trigger_Signals
Joint_Reset_Register
AI configuration start = 1;
AI_Mode_1_Register
Trigger once = 1;
AI_Trigger_Select_Register
Start edge = 1;
Start sync = 1;
Joint_Reset_Register
AI configuration start = 0;
AI configuration end = 1;
10. The function
AI_Scan_Start
Joint_Reset_Register
AI configuration start = 1;
AI_Start_Stop_Select_Register
Start edge = 1;
Start sync = 1;
Joint_Reset_Register
AI configuration start = 0;
AI configuration end = 1;
11. Call the function
Joint_Reset_Register
AI configuration start = 1;
AI_Start_Stop_Select_Register
Stop select = 19;
Stop sync = 1;
Joint_Reset_Register
AI configuration start = 0;
AI configuration end = 1;
to set the triggering options.
selects the scan start event.
to select the end of scan event.
AI_End_of_Scan
4-11
Chapter 4 Programming
configures the board
PCI E Series RLPM