Cutting Out Low Frequency - The Lcf Function - Sony CD-UX71 Operating Instructions Manual

Cutting out low frequency
– the LCF function
 , 
ENT
/MENU
When you set the LCF (Low Cut Filter)
function to "ON" in the stop or recording
mode, you cut out a low frequency to
reduce the roaring noise from wind,
etc.; therefore you can record a message
more clearly.
The LCF function is set to "OFF" when you
purchase the IC recorder.
1
Press and hold
the menu mode.
The menu mode window will be
displayed.
2
Press or on the control button
 
to select "LCF (LOW CUT)," and then
press ENT.
3
Press  or  on the control button
to select "ON," and then press ENT.
To cancel the LCF function
Set "LCF (LOW CUT)" to "OFF" in step 3.
/MENU to enter

GB