To Record Without Using The Synchronized Recording Function - Sony CD-UX71 Operating Instructions Manual


Notes
During synchronized recording, you cannot

divide a message (page 31) and you cannot
pause recording (page 25).
Depending on the equipment connected to

the IC recorder, the synchronized recording
function may not operate properly due to a
difference in the audio input level.
To record without using the
synchronized recording function
1
Press and hold
the menu mode.
The menu mode window will be
displayed.
2
Press or on the control button
 
to select "DETAIL MENU," and then
press ENT.
3
Press or on the control button
 
to select "SYNC REC," and then press
ENT.
/MENU to enter
4
Press  or  on the control button
to select "OFF," and then press ENT.
5
Press  (stop) to exit the menu
mode.
6
Connect other equipment to the IC
recorder when the IC recorder is in
the stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment
to the  (microphone) jack of the IC
recorder using an audio connecting
cable*.
"SELECT INPUT" appears in the display
window.

GB