Sony CD-UX71 Operating Instructions Manual page 102

Symptom
It takes a long time for the
IC recorder to start.
The IC recorder does not
operate correctly.
The IC recorder does not
operate.
The IC recorder is not
recognized by your
computer.
A folder/file cannot be
transferred from your
computer.
The file transferred from
your computer cannot be
played back.
Please note that recorded messages may be erased during service or repair work.
10
GB
Remedy
If the IC recorder is required to process a large amount of

data, it may take longer for the IC recorder to start. This is not
a malfunction of the IC recorder. Wait until the start-up display
disappears.
Take out the battery and insert it again (page 13).

You may have formatted the memory of the IC recorder using

the computer. Use the IC recorder formatting function to
format the memory (page 69).
Disconnect the IC recorder from your computer and reconnect

it.
Do not use a USB hub or USB extension cable other than

the supplied USB connection support cable. Connect the IC
recorder directly to your computer or use the supplied USB
connection support cable.
Operation is not guaranteed if you use any system

requirements other than those described on page 72.
Depending on the USB connector position, the IC recorder

may not be recognized. If this happens, try another connector.
The file format may differ from those that can be played back

using the IC recorder (.mp3/.wma) (page 40). Check the file
name.