Sony CD-UX71 Operating Instructions Manual page 68

Menu items
SCAN SENSITIVITY** Sets the scanning sensitivity when presetting FM radio
AUDIO OUTPUT**
DETAIL MENU
SYNC REC
SELECT INPUT Selects the external input to be recorded that is connected

GB
Settings (*: Initial setting)
stations.
HIGH (SCAN H)*:
The scanning sensitivity is set to high.
LOW (SCAN L) :
The scanning sensitivity is set to low.
During FM reception or FM recording, you can switch
between the sound from the speaker and the sound from
the headphones.
HEADPHONES* :
The sound comes out from the headphones.
SPEAKER :
The sound comes out from the speaker (s).
When set to "ON, " the IC recorder enters the recording
pause mode when no sound is detected for more than 2
seconds, and the IC recorder starts recording again as a
new message when any sound is detected.
ON:
The synchronized recording function is activated.
OFF*:
The synchronized recording function is cancelled.
to the  (microphone) jack.
MIC IN*:
Select when you record messages using an external
microphone.
AUDIO IN:
Select when you record using other equipment.
See page
91
87
35
33, 36