Sony CD-UX71 Operating Instructions Manual page 36

3
Press  or 
to select "SYNC REC," and then press
ENT.
4
Press or
 
to select "ON," and then press ENT.
5
Press  (stop) to exit the menu
mode.
6
Connect other equipment to the IC
recorder when the IC recorder is in
the stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment
to the  (microphone) jack of the IC
recorder using an audio connecting
cable*.

GB
on the control button
on the control button
"SELECT INPUT" appears in the display
window.
7
Press or on the control button
 
to select "AUDIO IN," and then press
ENT.
8
Press  (record/pause) to start
recording.
" " flashes and the IC recorder
enters the recording pause mode.
9
Start playback on the component
connected to the IC recorder.
" " appears on the display and
synchronized recording starts.
The synchronized recording pauses
when no sound is detected for more
than 2 seconds, and "
The IC recorder starts recording again as
a new message when sound is detected.
" flashes.