Disconnecting The Ic Recorder From Your Computer - Sony CD-UX71 Operating Instructions Manual


Notes
If you connect more than two USB devices

to your computer, normal operation will not
be guaranteed.
Use of this IC recorder with a USB hub or a

USB connection support cable other than
the supplied cable is not guaranteed.
A malfunction may occur depending on the

USB devices connected at the same time.
Before connecting the IC recorder to the

computer, make sure that the battery is
inserted in the IC recorder.
It is recommended that you disconnect the

IC recorder from the computer when you are
not using the IC recorder connected to the
computer.

GB
Disconnecting the IC
recorder from your
computer
Follow the procedures below; otherwise,
data may be damaged.
1
Make sure that the operation
indicator is not flashing.
2
Disconnect the IC recorder from the
USB connector of the computer.
On the Windows screen, left-click
"Safely Remove Hardware" on the
taskbar, and click "Safely remove USB
Mass Storage Device. "
On the Macintosh screen, drag the "IC
RECORDER" on the desktop to "Trash"
and drop it there.
For details on disconnecting the
IC recorder, refer to the operating
instructions supplied with your
computer.