Section 5: Operations; Operation Overview; General Operation - Grizzly G0852 Owner's Manual

SECTION 5: OPERATIONS

Operation Overview

The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Model G0852 (Mfd. Since 12/18)
manual BEFORE

General Operation

This cyclone dust collector creates a vortex of
incoming air that extracts heavy wood chips and
large dust particles, and then drops them into the
collection bag below (see Figure 50).
Wood
Chips
Incoming
Wood
Chips &
Fine Dust
Figure 50. Dust collector operation.
The remaining dust is caught by the canister filter
and deposited in the filter bag below. This spun-
bond polyester filter catches 99.9% of particles
from 0.2 to 2 micron in size, and is pleated to pro-
vide maximum surface area for efficient airflow.
To maintain CFM during heavy dust-collection
operations, a handle rotates internal brushes that
knock caked-on dust into the filter bag.
Canister
Filter
Fine
Dust
-31-