Improvements to this machine were made since the manual was originally printed, and this update covers
those changes. Keep this update with your Owner's Manual in case you ever need to refer to it. If you have
questions, contact Tech Support at (570) 546-9663 or by email at techsupport@grizzly.com.
Larger Impeller
We increased the size of the impeller from 13
to 14
⁄
" for improved performance.
1
2
The new part number for the 14
P0440014A.
Improved Magnetic Switch
We improved the remote controlled magnetic
switch since the manual was originally printed.
The new switch features an overload device that
requires the cyclone to be restarted after it has
been overloaded. The new features of the switch
are described below:
POWER: Lights up when there is power to the
machine.
RUN: Lights up when the machine is running.
OVER: Lights up if the machine has been over-
loaded. Machine will not start again until it has
been reset at the main switch.
To reset the machine from the overload state, turn
the main switch OFF, then ON.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄
" impeller is
1
2
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
#TR8038 PRINTED IN TAIWAN
MODEL G0440
2 HP CYCLONE
MANUAL UPDATE
⁄
"
1
2
���
���
��
�
�
�
�
��
�
�
�
�
REMOTE CONTROL
SWITCH
ON/OFF
2H
8H
4H
OVER
RUN POWER
TIMER
MAIN
SWITCH
220 VOLT
��������
���������