Programmed Operation; Setting The Clock - Rinnai PEPH-10PEW Operation & Installation Manual

HOW TO OPERATE THE HEATER

PROGRAMMED OPERATION

In addition to MANUAL OPERATION the heater can also be operated using a PROGRAMMED OPERATION
function, allowing the user to program the heater to operate for a set time period(s) over a 24 hour cycle.
Before the PROGRAMMED OPERATION can be used the clock will need to be set.
If the clock is not set when the heater is turned on the time will default to 00:00 (12 Midnight) and
NOTE
will begin running from that time.

Setting The Clock.

1. Press the POWER button
"hour" edit mode, use the 'Up'
the TIME button
2. Once the "minutes" are set, press the time
If the appliance is turned off using the power button
If the appliance is turned off using the main power switch
NOTE
will require re-setting.
Rinnai
B A
9
on the control panel console
2
or 'Down'
4
to set the "minutes" and use the 'Up'
3
5
, press the TIME button
A
buttons to set the Hours. Once the "hour" has been set press
5
or 'Down'
4
button to save the set time. The time displayed is in 24 Hour time.
3
the time will be saved.
2
9
3
4
2
this activates the time
3
buttons to set the "minutes".
5
then the time setting will be lost and
1
PEPH_OIM