HOW TO OPERATE THE HEATER
24 Hour Reset Button.
1. To completely cancel the programmed timer operation and restore the heater to manual operation press the
24Hr button
, this resets all the time blocks to ON (the heater will be ON at this time) and does not reset the
7
clock.
2. The heater will now operate as for "MANUAL OPERATION" on page 8.
The operational timer will need re-programming before the ON / OFF timer based operation can be
used see "Setting The Programed Operation Timer" on page 10 for details.
NOTE
ANTI-FROST PROTECTION FUNCTION
If the set temperature is set to CF 5 °C then the constant frost protection program will be activated.This is useful
during winter in alpine areas where the ambient temperature is likely to fall below 5° C.
ELECTRONIC LOCK FUNCTION
The Lock function is designed to prevent accidental operations and small children from altering the heater settings.
To Activate The Lock
Press the 'Up'
or 'Down'
4
displayed. All control functions are now locked and none of the buttons on the control will work.
To Deactivate The Lock
To deactivate the lock, repeat locking step above to return to normal operation.
The Lock function is also de-activated if the heater is switched 'off' via the main power switch
NOTE
Rinnai
B
A
9
9
10
buttons simultaneously until three beeps are heard and the padlock symbol
5
7
5
5
5
11
4
6
4
4
10
1
PEPH_OIM
is
.