Table of Contents
Advertisement
Operation & Installation Manual
Electric Panel Heaters
Models: DEPH-10DTW, DEPH-15DTW & DEPH-22DTW
For safe, reliable operation and optimum performance
this appliance must be installed, operated and
maintained in accordance with these instructions.
Read these instructions thoroughly before attempting
installation and operation.
Keep these instructions handy for future reference.
Advertisement
Table of Contents
Related Manuals for Rinnai DEPH-10DTW
Summary of Contents for Rinnai DEPH-10DTW
- Page 1 Operation & Installation Manual Electric Panel Heaters Models: DEPH-10DTW, DEPH-15DTW & DEPH-22DTW For safe, reliable operation and optimum performance this appliance must be installed, operated and maintained in accordance with these instructions. Read these instructions thoroughly before attempting installation and operation.
- Page 2 BEFORE PROCEEDING WITH THE OPERATION OR INSTALLATION OF YOUR NEW HEATER PLEASE READ THIS MANUAL THOROUGHLY AND GAIN A FULL UNDERSTANDING OF THE REQUIREMENTS, FEATURES AND OPERATION OF YOUR NEW APPLIANCE. Rinnai DEPH_OIM...
-
Page 3: Table Of Contents
TILT SWITCH ..............................10 CARE AND MAINTENANCE......................11 CARE OF THE HEATER ..........................11 ERROR CODES ............................. 11 SERVICE AND REPAIR ..........................11 DISPOSAL ..............................11 INSTALLATION..........................12 GENERAL............................... 12 WALL INSTALLATION............................ 12 FREESTANDING INSTALLATION ......................... 14 CONTACT INFORMATION .......................16 Rinnai DEPH_OIM... - Page 4 This page is intentionally blank Rinnai DEPH_OIM...
-
Page 5: Warranty, Features & Specifications
2. Failure due to abuse or misuse, improper maintenance, failure to maintain or improper storage. 3. Failure due to incorrect or unauthorised installations or outdoors use. 4. Failure or damage caused by alterations, service or repair work carried out by persons other than Rinnai service persons or service agents. -
Page 6: Safety & Important Points
• The flexible cord and plug must not be modified. If the cord or plug are damaged, they must be replaced by Rinnai or a Rinnai appointed service agent. • DO NOT cover or place articles on or against any parts of this heater, to avoid overheating. -
Page 7: How To Operate The Heater
This heater features audible chimes. On start up a set of rising chimes will sound, while on shut down a set of falling chimes will sound, there is also a chime for each button press and if the heater NOTE is tilted beyond 45° a continuous tilt warning chime will sound. Rinnai DEPH_OIM... -
Page 8: Connecting The Power
During the initial burning in period or after long periods of non use some light grey smoke or smell may be experienced. This is normal and is caused by dust that may have settled on the heating IMPORTANT element. During this period the space being heated should be well ventilated. Rinnai DEPH_OIM... -
Page 9: Delay Off Timer Operation
5. To cancel delay off timer and return manual operation press ‘Up’ button for 5 seconds. 6. To stop heater operation completely press POWER button , a shutdown falling chime will be heard and the power indicator will remain illuminated to show that the heater has returned to standby mode. Rinnai DEPH_OIM... -
Page 10: Anti-Frost Protection Function
45°, an audible warning is also provided in the form of a repeating 1 second chime and the interval digit will flash as a visual indication. When the heater is returned to an upright position, normal operation will then be resumed. Rinnai DEPH_OIM... -
Page 11: Care And Maintenance
5. Ensure the heater is dry before reconnecting to the electricity supply. ERROR CODES Your Rinnai panel heater has a self diagnostic capability. If a fault occurs, an Error Code will flash on the two digits of Digital LED display , a repeating chime will also sound and the appliance will be prevented from operating. -
Page 12: Installation
2. Mount the supplied wall mounting hooks using the following dimensions to the wall using appropriate fixings, ensuring that the brackets are level and the minimum clearances as described above are observed. Minimum Height above floor 435mm = 340mm for 1000W = 500mm for 1500W Wall = 920mm for 2200W mounting hooks Rinnai DEPH_OIM... - Page 13 6. The heater is now ready to be used as a free standing appliance. Refer to the operation section at the front of this manual for full instructions on how to use the heater. Rinnai DEPH_OIM...
-
Page 14: Freestanding Installation
8. The heater is now ready to be used as a free standing appliance. Refer to the operation section at the front of this manual for full instructions on how to use the heater. Rinnai DEPH_OIM... -
Page 15: Rinnai Deph_Oim
NOTES Rinnai DEPH_OIM... -
Page 16: Contact Information
Braeside, Victoria 3195 For further information visit: www.rinnai.com.au Rinnai has a Service and Spare Parts network with personnel who are fully trained and equipped to give the best service on your Rinnai appliance. If your appliance requires service, please call our National Help Line.