Heater Operation - Rinnai EPH10MW Operation & Installation Manual

HEATER OPERATION

9
A
To turn the heater on and set the heating level:
Ensure heater is plugged in and the power socket outlet is switched on.
1. Turn the main power switch
2. Adjust the heating dial
illuminate to indicate the heater is now in operation.
The graduated comfort zone settings
for choosing an appropriate heating level.
NOTE
Levels 3 to 6 indicate the Comfort Zone in which most standard evironments will have a generally
comfortable level of heating.
3. Allow the room to reach the desired comfort level.
Time taken to reach the desired comfort level may vary from room to room, due to factors such as:
Building construction type, Building insulation level, Room size, Ceiling Height, Number of
NOTE
windows and window furnishings & The amount of furniture and other fixtures within the room.
4. Once the room has achieved the desired level of comfort the thermostatic control will then cycle the heater on
and off as required to maintain the set comfort level.
5. If the selected comfort level temperature is cooler than desired, select a higher setting on the heating control
dial .
2
6. If the selected comfort level temperature is warmer than desired, select a lower setting on the heating control
dial .
2
7. To stop heater operation completely turn the main power switch
appliance, to the OFF '0' position.
Rinnai Australia
HOW TO OPERATE THE HEATER
2 4
3 4 5
5
located on the right hand side of the appliance, to the ON 'I' position.
1
to the desired numeric heating level
2
10
8
3
6
. The heating operation indicator
4
on the heating control dial provide a quick user reference
5
1
3
A
6
1
located on the right hand side of the
7
will
3
Operation Manual