Installing The Transfer Unit - Ricoh Pro C901S Replacement Manual

8.2 Installing the Transfer Unit

Procedure
1. While holding the transfer unit (1) with both hands, align the stays (2) of the
transfer unit with the shafts of the registration unit drawer, and then set the
transfer unit on the registration unit drawer.
2. Slide the rear lock (3) forward to align it with the shaft screw hole.
3. Slide the front lock (4) backward to align it with the shaft screw hole.
3
2
Important: Install the transfer unit securely, as shown below.
2
4
1
RPG005S
52
RPG066S