Ricoh Pro C901S Replacement Manual page 44

11. While pressing the lock levers on either side of the developer bottle, carefully
pull the bottle toward you.
12. Disconnect the developer bottle from the contact on the developer inlet, and
then remove it.
13. Turn the developer bottle upside down.
14. Reattach the front top cover and close the toner hopper cover. (See p.22
"Reattaching the Front Top Cover".)
15. Close the left and right front cover.
16. Reset the replaceable parts counter for the replaced developer. (See p.20
"Resetting the Replaceable Parts Counter".)
1
bzs136
44