Smeg Cortina SF4750VC User Manual page 33

The display shows the level depending on
the quantity of water in the reservoir:
Reservoir full
Reservoir half full
Reservoir at minimum level
Reservoir empty
The residual water is discharged into the
evaporation tray: as well as facilitating
removal, this contributes to cooling down
the oven more quickly.
If the remaining quantity of water is over
500 ml, the water will be discharged into
the evaporation tray in two different steps to
facilitate drying. When the first step finishes,
the messages
will flash on the display and
emptying will stop. The confirmation knob
must be pressed again to finish draining off
the residual water. When this is complete,
the message
displayed.
Use
6. Squeeze out the excess water into a
7. Also remove condensation from the base
8. Turn the function knob and the
and
For the auxiliary functions
will be
"Cleaning and maintenance" section of this
manual.
separate container.
Take care: the water may be very
hot.
and walls of the oven, the door glass
and drip tray and the front of the
appliance.
temperature knob to the 0 position to
switch the appliance off.
and
,
, see the
87