Smeg Cortina SF4750VC User Manual page 32

If you do not wish to set delay proving, just
wait a few seconds or press the setting knob
until the timed cooking
indicator lights start flashing, otherwise
continue from step 7.
7. Press the setting knob. The symbol
flashes on the clock and the default
delay time
minutes) is shown on the display.
8. Turn the setting knob to the left or right
within 5 seconds to set the duration (max
2 hours).
9. Press the setting knob or wait 5 seconds
from the last setting: the timed cooking
and steam
the clock.
10. Press the confirmation knob: the timed
cooking and steam
lights stop flashing on the clock and the
messages
flash on the display to
request that the reservoir be filled with
water (see"Filling the reservoir").
86
and steam
(hours/
indicator lights flash on
indicator
and
Use
H2O Out: Forced removal of residual
water
This function drains the reservoir when this
operation has not been performed normally
after steam or combined cooking.
1. Turn the function knob to the auxiliary
functions
2. Turn the setting knob to select H2O Out
3. Press the confirmation knob to confirm the
selected function: the messages
flash on the display to indicate the
request to empty the reservoir.
4. Insert the supplied sponge into the
evaporation tray.
5. Press the confirmation knob to begin
draining residual water from the
reservoir.
symbol.
.
and will