Power Cord - Vulcan-Hart VBP5 Service Manual

V Series Heated Holding Insulated Cabinets - REMOVAL AND REPLACEMENT OF PARTS
Fig. 11
5. Remove heating element mounting screws.
Fig. 12
6. Reverse procedure to install.
When installing inside access cover, verify edge
inserts into slot without catching.
1. Remove TOP COVER .
2. Note and disconnect wiring from terminal block
and high limit.
3. Squeeze cord grip to remove from panel.
4. Reverse procedure to install.
Page 7 of 17
Fig. 13

POWER CORD

Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
Fig. 14
F45748 (0219)