V Series Heated Holding Insulated Cabinets - REMOVAL AND REPLACEMENT OF PARTS
REMOVAL AND REPLACEMENT OF PARTS
TOP COVER
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
NOTE: Remove top cover to access power cord,
cooling fan, and control board.
1.
Remove screws from top and side of top cover.
Fig. 3
Fig. 4
2.
Lift cover off cabinet.
3.
Reverse procedure to install.
FOOD COMPARTMENT FAN
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1.
Remove TOP COVER .
2.
Remove insulation (1, Fig. 5).
3.
Note and disconnect wiring from terminal block
and control board.
4.
Remove inside access cover (1, Fig. 6).
5.
Remove fan mounting bracket.
6.
Remove screws from fan.
7.
Install fan with label (1, Fig. 7) up.
Page 5 of 17
Fig. 5
Fig. 6
F45748 (0219)