Heating Elements - Vulcan-Hart VBP5 Service Manual

V Series Heated Holding Insulated Cabinets - REMOVAL AND REPLACEMENT OF PARTS
Fig. 7
8. Reverse procedure to install.
Verify air flow direction in cavity.
Fig. 8
F45748 (0219)
When installing inside access cover, verify edge
inserts into slot without catching.

HEATING ELEMENTS

1. Remove TOP COVER .
2. Remove insulation (1, Fig. 10).
3. Note and disconnect wires from terminal block
and control board.
4. Remove inside access cover (1, Fig. 11).
Page 6 of 17
Fig. 9
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
Fig. 10