Parameters List; Resetting Alarms/Warnings - Sullair SRV-250 User Manual

5.3

Parameters list

Type No. Description
A 1 Dryer working hours
A 2 Compressor working hours
A 3 ON time of drain valve (0=disabled)
A 4 OFF time of drain valve
A 5 Manually force ON drain valve
A 6 Metric/Imperial data reading
b 1 Maintenance due warning interval
b 2 Dryer working time reset
b 3 Compressor working time reset
b 4 Automatic restart after power interrupt
b 5 Automatic restart delay
Remote OFF (by contact or supervisor)
b 6
enable
b 7 Net identification number of dryer
b 8 Communication speed with supervisor
b 9 Communication protocol
b 10 Air inlet temperature sensor installed
b 11 Ambient temperature sensor installed
b 12 Effect of user alarm intervention
b 13 Signalling delay of user alarm
b 14 User alarm reset mode
b 15 High dew point warning temperature
b 16 High dew point warning delay
b 17 High air inlet temperature warning
b 18 High ambient temperature warning
b 19 Low ambient temperature warning
Alarm sound activation time
b 20
(0=continuously)
b 21 Version and revision number of software
b 22 Emission date of software
b 23 New password for "b" type parameters
Code: 02250144- - 517 SRV- - 250 --- SRV- - 2400
Range Units Default
0 ---999999 hours 0
0 ---999999 hours 0
0 ---100 secs 4
1 ---999 secs 170
no, YES --- --- --- no
˚C---bAr ˚F---PSI --- --- --- ˚F---PSI
0 ---999999 hours 20000
no, YES --- --- --- no
no, YES --- --- --- no
no, YES --- --- --- YES
0 ---300 secs 0
no, YES, LOC --- --- --- no
1 ---200 --- --- --- 1
1200 ---19200 bits/sec 1200
ModbuS, CUStOM --- --- --- ModbuS
no, YES --- --- --- YES
no, YES --- --- --- YES
run, StOP --- --- --- run
0 ---600 secs 0
MANUAL, Auto --- --- --- Auto
˚C 10.0
0.0 ---30.0 ---32.0 ---86.0
˚F 50.0
1 ---60 mins 15
10 ---99 ˚C 65.0
50 ---210 ˚F 149.0
0 ---70 ˚C 55
32 ---158 ˚F 131
- - 30 ---30 ˚C 2
- - 22 ---86 ˚F 35.6
0 ---900 secs 0
--- --- --- --- --- --- --- --- ---
--- --- --- --- --- --- --- --- ---
1 ---32000 --- --- --- 0
6 Alarms
The Dryer features numerous Alarms and Warnings to ensure correct operation.
Warnings do not effect Dryer operation, whilst Alarms partially or totally block
Dryer operation.
NB: A voltage free General Alarm contact is provided, to allow remote Alarm signal-
ing (refer to Dryer's electrical diagram).
6.1

Resetting Alarms/Warnings

The following scheme outlines the procedure to be applied to reset an Alarm or
Warning.
S alarm siren sounds
S alarm LED turns on
S unit reacts as in Tab. 1
S "OFF" is displayed if the dryer stops.
ALARM/WARNING
intervention
alarm
press
reset
alarm siren is muted
alarm
press
reset
Alarm/Warning type is
displayed
alarm
press
reset
S alarm LED switches off
S display returns to normal
S unit returns to normal operation
English
9