ZyXEL Communications LTE3316-M604 User Manual page 24

Figure 7 Navigation Panel
The following table describes the navigation panel menus and sub-menus.
Table 4 Navigation Panel
MENU SUB-MENU
Status
This screen shows the Zyxel Device's general device, system and interface status information. Use this screen to
access the summary statistics tables.
Monitor
Log View Log
Log Setting
DHCP Table
ARP Table
Packet Statistics
WLAN Station
Status
LTE Modem Status
Configuration
Network
WAN WAN Management
Network Scan
IPv6
PIN Management
Wireless LAN General
More AP
MAC Filter
Advanced
QoS
WPS
WPS Station
Scheduling
WDS
LAN IP
Chapter 2 Web Configurator
DESCRIPTION
Use this screen to see the logs for the categories that you selected in the
Log Settings screen.
Use this screen to configure to where and when the Zyxel Device is to
send the logs and which logs and/or immediate alerts it is to send.
Use this screen to view current DHCP client information.
Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection
Use this screen to view port status and packet specific statistics.
Use this screen to view the wireless stations that are currently associated
to the Zyxel Device's 2.4G and 5G wireless LAN.
Use this screen to view the detailed information about the LTE module,
cellular interface, and SIM card. You can also view the LTE connection
status.
This screen allows you to configure ISP parameters, WAN IP address
assignment, and DNS servers.
Use this screen to specify the type of the mobile network to which the
Zyxel Device connected and how you want the Zyxel Device to connect
to an available mobile network.
Use this screen to configure the Zyxel Device's IPv6 settings.
Use this screen to enable PIN code authentication and enter the PIN
code.
Use this screen to enable the wireless LAN and configure wireless LAN
and wireless security settings.
Use this screen to configure multiple BSSs on the Zyxel Device.
Use the MAC filter screen to allow or deny wireless stations based on their
MAC addresses from connecting to the Zyxel Device.
This screen allows you to configure advanced wireless LAN settings.
Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
Use this screen to configure the WPS settings.
Use this screen to add a wireless station using WPS.
Use this screen to schedule the times the Wireless LAN is enabled.
Use this screen to enable and configure the WDS settings.
Use this screen to configure LAN IP address and subnet mask.
LTE3316 Series User's Guide
24