L2Tp Client - ZyXEL Communications LTE3316-M604 User Manual

Table 49 Configuration > Application > VPN > L2TP VPN (continued)
LABEL
Authentication
MPPE
Encryption
Tunnel List
This displays the Zyxel Device's current L2TP VPN tunnels.
Refresh
User Name
Remote IP
Remote Virtual
IP
Remote Call ID
Actions
VPN Account List
This displays a list of the L2TP user accounts allowed to establish VPN tunnels.
Add
Delete
ID
Enable
User Name
Password
Action
Cancel
Apply

18.4 L2TP Client

Use the L2TP Client Status screen to view details about L2TP clients. Click Configuration > Application>
VPN > L2TP Client to open the following screen.
Chapter 18 VPN
DESCRIPTION
Select PAP, CHAP, MS-CHAP, and/or MS-CHAP v2 as your authentication method.
PAP (Password Authentication Protocol) - The L2TP server will crosscheck the username and
password sent by the client with the database for authentication purposes.
CHAP (Challenge Handshake Authentication Protocol) - When it's enabled, MSCHAP and MS-
CHAP-v2 are both supported.
You can't enable PAP and CHAP when MPPE Encryption is enabled.
Click the check box to use MPPE, Microsoft Point to Point Encryption. Select whether you will
have 40-bit, 56-bit or 128-bit session key used to initialize the encryption.
Click Refresh to update the Zyxel Device
This is the user name establishing an L2TP VPN tunnel.
This is the client's public IP for this VPN connection.
This displays the IP address assigned by the L2TP server to the connected client.
This displays the call identification the L2TP Server uses to identify its clients.
Use this to end a connected client's L2TP tunnel.
Click Add to create a new L2TP user account.
Click Delete to remove a L2TP user account.
This field displays the index number of the L2TP user account.
Select this to enable this L2TP user account, once it is enabled that client can establish a VPN
tunnel.
Enter the user name for PPP authentication. It must be consistent with the configuration made
on LNS (L2TP Network Server). Otherwise the L2TP VPN connection will not be established.
Enter the password for PPP authentication. It must be consistent with the configuration made on
LNS (L2TP Network Server). Otherwise the L2TP VPN connection will not be established.
Click Modify to change modify an existing L2TP user account, select the check box and click
Delete to remove it.
Click Cancel to exit this screen without saving.
Click Apply to save your changes back to the Zyxel Device.
LTE3316 Series User's Guide
123