ZyXEL Communications LTE3316-M604 User Manual page 138

Note: You must enable the remote management service in the Configuration > Management
> MGMT Interface > Local MGMT screen for the settings in the WWW screen to take
effect.
Figure 78 Configuration > Management > MGMT Interface > Local MGMT
The following table describes the labels in this screen.
Table 58 Configuration > Management > MGMT Interface > Local MGMT
LABEL
HTTPS
Port
HTTP
Port
SSH
Enable
Port
Telnet
Chapter 21 MGMT Interface
DESCRIPTION
You may change the server port number for a HTTPS service if needed. However you
must use the same port number in order to use that service for remote
management.
You may change the server port number for a HTTP service if needed. However you
must use the same port number in order to use that service for remote
management.
Select this to enable Secure SHell (SSH) to securely access the Zyxel Device CLI
interface. SSH is a secure communication protocol that combines authentication
and data encryption to provide secure encrypted communication between hosts
over an unsecured network.
You may change the server port number for the SSH service if needed. However you
must use the same port number in order to use that service for remote
management.
LTE3316 Series User's Guide
138