ZyXEL Communications LTE3316-M604 User Manual page 144

Figure 82 Bandwidth Management Rule Configuration
The following table describes the labels in this screen.
Table 61 Bandwidth Management Rule Configuration
LABEL DESCRIPTION
QoS Rule Configuration
Interface Select the Zyxel Device's interface through which traffic in this shaper applies.
Group Select to use the IP address or MAC address of the destination computer for whom this rule
applies.
Control Function Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or minimum
bandwidth allowed for the rule in KBps (kilobytes per second) or MBps (megabytes per
second).
Rule Enable Select this check box to turn on the bandwidth management rule.
Back Click Back to return to the previous screen.
Cancel Click Cancel to exit this screen without saving.
Apply Click Apply to save your customized settings.
See Appendix B on page 180
Chapter 22 Bandwidth Management
for commonly used services and port numbers.
LTE3316 Series User's Guide
144