Technical Data; Ecofast Terminal Block (6Es7 194-3Aa00-0Aa0); Pin-Out Of The Sockets X01 And X02 - Siemens SIMATIC ET 200eco Manual

Technical data

6.1

ECOFAST terminal block (6ES7 194-3AA00-0AA0)

Properties
Characteristics of the ECOFAST terminal block:
• Can be plugged in and screwed on to any I/O module.
• Connection to power supplies and PROFIBUS DP via ECOFAST connector (at
socket X01, supply lines).
• Looping the power bus and PROFIBUS DP to the next PROFIBUS node via
additional ECOFAST connector (at socket X02, loop–through).
• Internally interconnected supply line socket X01 and loop–through socket X02
(T functionality).
• Adjustable PROFIBUS address (1 to 99) via configuration plug.
Note
The ECOFAST terminal block may only be operated with the I/O modules
6ES7 14*-3B*00-0XA0.
Pin assignment of the ECOFAST sockets
The table below shows the pin assignment of the two ECOFAST sockets for the
connection to the power supplies and PROFIBUS DP.
Table 6-1
Pin Assignment of the
infeed socket X01
A PROFIBUS DP Signal A
B PROFIBUS DP Signal B
1 Electronic/sensor power supply (1L+)
2 Ground potential, sensor power supply (1M)
3 Ground potential, load voltage supply (2M)
4 Load voltage supply (2L+)
6-2

Pin-out of the sockets X01 and X02

through–loop socket
Assignment of the
X02
ET 200eco Distributed I/O Station
View of the socket (Front
view of the terminal
blocks)
A A B B
2 3
1
4
A5E00158716-02