Regeneration Time; Days To Regenerate (740 Time-Clock Controller Only); Calendar Override (760 On-Demand Controller Only); Amount Of Brine Used Per Regeneration - Pentair AUTOTROL Performa 263 Installer Manual

Installer Manual Performa 263-268 / LOGIX 740-760 - Programming

6.3.4. Regeneration time

Set the time when regeneration will take place.
A Press .
→ Regeneration time flashes.
B Adjust displayed time with
C Default setting: 2:00am.
D Press to validate the selection and advance to the next
parameter using

6.3.5. Days to regenerate (740 time-clock controller only)

Set number of days between time-clock regeneration (regen frequency).
A Press .
→ Number of days flashes.
B Adjust displayed number with
→ Default number: 3 days.
→ Days can be adjusted from ½ (.5) to 99 days.
C Press to validate the selection and advance to the next
parameter using

6.3.6. Calendar override (760 on-demand controller only)

Set number of days for calendar override on-demand controller.
A Press .
→ Number of days flashes.
B Adjust displayed number with
→ Default time for calendar override: 0 day.
→ Days can be adjusted from ½ (.5) to 99 days.
C Press to validate the selection and advance to the next
parameter using

6.3.7. Amount of brine used per regeneration

Set desired brine amount. 3 salt settings are available on 740 and 760 controllers:
• S – Standard Salt – 120 grams/liter of resin.
• H – High Salt – 200 grams/liter of resin.
• L – Low Salt – 40 grams/liter of resin.
A Press .
→ Setting flashes.
B Adjust displayed settings with
→ Default setting is "S" standard salting.
C Press to validate the selection and advance to the next
parameter using
34 / 64
and .
or .
and .
or .
and .
or .
and .
or .
Ref. MKT-IM-011 / A - 15.06.2017