Connecting To An External Control System - Shure Microflex MXV Series User Manual

Connecting to an External Control System

The MXW System connects to an AMX or Crestron control system via the Ethernet. Use only one controller per system to
avoid messaging conflicts. For a comprehensive list of MXW command strings, visit: http://shure.custhelp.com/app/answers/
detail/a_id/5207
• Connection: Ethernet (TCP/IP; MXW is the client)
• Port: 2202
IP Ports and Protocols
Shure Control
Port TCP/UDP Protocol
21 tcp FTP
22 tcp SSH
23 tcp Telnet
68 udp DHCP
80* tcp HTTP
427 tcp/udp SLP
443 tcp HTTPS
161 tcp SNMP
162 tcp SNMP
843* tcp Flash
2202 tcp ASCII
5353 udp mDNS
5568 udp SDT
8023 tcp Telnet
8180* tcp Flash
8181* tcp Flash
8427 udp Multcast SLP
64000 tcp Telnet
Dante Audio & Controller
Port TCP/UDP
162 udp
Description
Required for firmware updates (otherwise closed)
Not supported
Standard console interface
Dynamic Host Configuration Protocol
Required to launch embedded web server
†
Required for inter-device communication
Not supported
Not supported
Not supported
Required for web application
Required for 3rd party control strings
†
Required for device discovery
†
Required for inter-device communication
Debug console interface
Required for web application
Required for web application
†
Required for inter-device communication
Required for Shure firmware update
Protocol Description
SNMP Used by Dante
Shure Incorporated
Factory De­
fault
Closed
Closed
Closed
Open
Open
Open
Closed
Closed
Closed
Open
Open
Open
Open
Password
Open
Open
Open
Open
67/103