Table of Contents
Advertisement
Monitors the charge status of the connected microphone in increments of <10, 10, 25, 50, 75, 100% (see Batteries for more
detail). Additionally, the five LEDs flash for several seconds when the microphone has been successfully linked to the chan
nel.
⑥ Locking DC Power Supply
Secures the PS60 power supply to the input jack of the station.
⑦ Power Switch
Powers the unit on or off.
⑧ Ethernet Port
Connects to the MXW System network through an MXW Audio Network Interface or a switch using an Ethernet cable.
⑨ Ethernet Status LED (Green)
◦
Off = no network link.
◦
On = network link established.
◦
Flashing = network link active.
⑩ Ethernet Link Speed LED (Amber)
◦
Off = 10 Mbps
◦
On = 100 Mbps
Connecting Microphones
Place a microphone in the charger by connecting it to one of the channel slots. The channels in the top row have two USB
ports to accommodate different types of microphones. Do not attempt to connect to both USB ports at the same time.
Note: 2-channel chargers do not support gooseneck microphones.
•
Handheld, boundary and bodypack: use the main vertical slots in the recessed bays.
•
Gooseneck base: uses the top row's horizontal connectors.
Microphone Transmitters
Description
① Power Button
Different Connectors for the Same Channel
Shure Incorporated
18/103
Hide quick links:
Advertisement
Table of Contents
