Open The Mxw Control Software - Shure Microflex MXV Series User Manual

③ Networked Charging Station (NCS)
Connect the PS60 external power supply from the charger to an AC power source. Turn on the power switch.
Fully Charge the Transmitters
Whenever possible, charge to full the MXW transmitters before an event. Transmitters can be charged in any networked charg­
ing station, even if it is associated to another Group or on a separate network.
Battery Charge Times
Approximate Charge Times
Charger Type
Networked Charging Station (NCS)
Networked Charging Station (NCS) in High Efficiency
Mode (Link LED illuminated blue)
USB Charger
*Calculated with a new battery. Runtimes vary depending on battery health.

Open the MXW Control Software

Access the MXW control software from any computer on the MXW network. The software is hosted from a webserver embed­
ded in the MXW devices, and operates using Adobe Flash .
Time to Full Charge* (hr:min)
2:00
4:00
Powered On = 3:30
Powered Off = 2:30
® ®
Shure Incorporated
41/103