Inserting The Address Keys; Tx-I/O Start Up - Siemens TX-I/O Quick Start Manual

TX-I/O Quick Start

Inserting the Address Keys

The TX-I/O address keys must be inserted, seated, and closed correctly in order
to function. Remove the address key from the strip, and then insert as shown.

TX-I/O Start Up

See the TX-I/O Getting Started Guide (553-636) for start-up procedures once the
TX-I/O modules are installed, addressed, and wired.
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications
and models as design improvements are introduced. Other product or company names mentioned herein may be the trademarks of
their respective owners. © 2007 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
16
1
Your feedback is important to us. If you have
comments about this document, please send
them to SBT_technical.editor@siemens.com
2
Document No. 553-632
Country of Origin: US
Siemens Building Technologies, Inc