Table of Contents
Advertisement
Installation and Maintenance
4.1 Installation
4.1.2
Installation on a DIN Rail
Installation on a SIMATIC S7-300 DIN rail
1. Place the upper guide at the top of the SCALANCE housing in the S7 standard rail.
2. Screw the media converter of the SCALANCE X-100 series to the underside of the DIN
3. Fit the connectors for the power supply.
4. Fit the connectors for the signaling contact.
5. Plug the terminal blocks in the corresponding sockets on the device.
Figure 4-3
Uninstalling
To remove the media converters of the SCALANCE X-100 series from the SIMATIC S7-300
DIN rail:
1. First remove all connected cables.
2. Unscrew the screw fittings at the lower part of the standard rails and subsequently pull
4-4
rail.
Installation on a SIMATIC S7-300 DIN rail
the device away from the standard rail.
Industrial Ethernet Media Converters SCALANCE X-100 Series
Commissioning Manual, 06/2006, A2B00051526A, Product Version 03
Advertisement
Table of Contents
