Installation and Maintenance
4.1 Installation
4.1.1
Installation on a DIN Rail
Installation
Install the media converter on a 35 mm DIN rail according to DIN EN 50022.
1. Place the upper catch of the device over the top of the rail and then push in the lower part
2. Install the electrical connecting cables for the power supply and the terminal block for the
3. Plug the terminal blocks in the corresponding sockets on the device.
Figure 4-1
4-2
of the device against the rail until it clips into place.
signaling contact.
Installation on a DIN rail (35 mm)
Industrial Ethernet Media Converters SCALANCE X-100 Series
Commissioning Manual, 06/2006, A2B00051526A, Product Version 03