Table of Contents
Advertisement
3
CONNECTORS USED FOR ROTARY SERVO
MOTOR WIRING
Precautions
• The indicated IP rating is the connector's protection against ingress of dust and water when the connector is connected to a
rotary servo motor. If the IP rating of the connector and rotary servo motor varies, the overall IP rating depends on the
lowest IP rating of all components.
• If the mating part of the connector has a flaw or an excessive load (including a temporary load at installation or other
situations) is applied to the connector and cable clamp, the performance of the connector IP rating may not be satisfied.
• The fitting warranty is applied only to the option cables and the connectors manufactured by the manufacturers introduced
in this manual.
3.1
Selection of connectors
Use the connector configuration products given in the table as the connectors for connection with the rotary servo motor.
Refer to the following for the compatible connector configuration products.
Page 29 Wiring connectors (connector configuration A)
Page 30 Wiring connectors (connector configurations B/C/D/E)
HK-KT series/HK-MT series/HK-RT (1.0 kW - 2.0 kW) series
Rotary servo motor
HK-KT_
HK-MT_
HK-RT103(4)W
HK-RT153(4)W
HK-RT203(4)W
Power supply/brake/encoder connector
Wiring connector
For encoder
Connector configuration A
3 CONNECTORS USED FOR ROTARY SERVO MOTOR WIRING
For electromagnetic brake
For power supply
3.1 Selection of connectors
3
27
Advertisement
Table of Contents
