Siemens SIMATIC PCS 7 Function Manual page 31

Using a template to create a batch faceplate
Graphics Designer (WinCC-Explorer) provides a template for selecting batch faceplates in
PCS 7 OS pictures.
1. Open the required process picture in Graphics Designer.
2. Open the "@Template_Batch.pdl" template file by selecting the File > Open command.
3. Use the "IEOP" block icon to visualize technical operations in the faceplate.
4. Select the block icon from the template file and then copy it to your process picture.
5. Select the block icon in your process picture.
6. Double-click the PCS 7 function "Interconnect faceplate with process tag" in "Standard
7. Click "Continue" in the Dynamic Wizard, and then click the search function "...".
8. The variable selection dialog displays all instantiated blocks. Select the required block,
Result: You have successfully installed the "IEOP" block icon for calling the corresponding
faceplate in the process picture you edited.
SIMATIC BATCH Interface Blocks V7.1
Function Manual, 03/2009, A5E02171101-01
dynamics" in the Dynamic Wizard window.
and then click OK > Continue > Finish.
BATCH interface blocks
2.2 IEOP
31