Siemens SIMATIC PCS 7 Function Manual page 17

Representation Input/output field
Batch "Status" display
Buttons "T", "H", "B"
Status in string, hexadecimal,
and binary format
Operation and display "Batch"
Enable for BATCH
Occupy
Batch no.
Batch name
Step no.
Step time
Number of loops
Average number of steps
Representation Input/output field
Setpoints Enable for BATCH
Tabular display of setpoints,
for example, setpoint, actual
value, unit and parameter
name.
Representation Input/output field
Materials Enable for BATCH
Tabular display of materials: lists
all outputs of the IEPAR_PI and
IEPAR_PO blocks
Creating user authorizations
The operator enable option must be set to "Yes" in the "Other" section of the "Properties" tab
in the object properties dialog of the IUNIT and IEPH/IEOP faceplates.
The operator must also be authorized to control an object. The access security levels for
operators are set up by means of the User Administrator in WinCC Explorer:
● Operator input must be enabled at authorization level 5 (process control) or 6 (higher-
● The access security levels can be assigned as follows:
SIMATIC BATCH Interface Blocks V7.1
Function Manual, 03/2009, A5E02171101-01
priority process control).
– generally for all units ("Enable" column in the User Administrator)
– unit-specific ("<unit name>" column in the User Administrator)
User authorization Block parameters
- QUSTAT_L
- -
- BA_EN bit 18
- OCCUPIED bit 24
- VBA_ID
- VBA_NAME
- VSTEP_NO
- STEP_T
- VLOOP_I
- Q_STEP_T
User authorization Block parameters
- BA_EN bit 18
- Each row of the list box represents an
IEPAR_ block which is interconnected at input
EPE_CONN.
User authorization Block parameters
- BA_EN bit 18
- Each list box represents an insertion material
or a material yield.
BATCH interface blocks
2.1 IEPH
17