Siemens SIMATIC PCS 7 Function Manual page 30

BATCH interface blocks
2.2 IEOP
Representation Input/output field
Batch "Status" display
Buttons "T", "H", "B"
Status in string, hexadecimal, and binary
format
Operation and display "Batch"
Enable for BATCH
Occupy
Batch no.
Batch name
Step no.
Step time
Number of loops
Average number of steps
Representation Input/output field
Setpoints Enable for BATCH
Tabular display of setpoints: For example,
the setpoint, actual value, unit and the
parameter name.
Representation Input/output field
Materials Enable for BATCH
Tabular display of materials: lists all
outputs of the IEPAR_PI and IEPAR_PO
blocks.
Setting user authorizations
You can generally enable the control of objects for yourself in the "Properties/Other" tab of
the object properties dialog of the UNIT and EPH/EOP faceplates.
● Yes - the object can be controlled in process mode
● No - the object can be controlled in process mode.
● You can only select access levels 5 (process control) and 6 (higher-priority process
● The access security levels can be assigned as follows:
30
The operator must also be authorized in order to be able to control an object. The access
security levels for operators are set up by means of the User Administrator in WinCC
Explorer:
control).
– generally for all units ("Enable" column in the User Administrator)
– unit-specific ("<unit name>" column in the User Administrator)
User authorization Block parameters
- QUSTAT_L
- -
- BA_EN bit 18
- OCCUPIED bit 24
- VBA_ID
- VBA_NAME
- VSTEP_NO
- STEP_T
- VLOOP_I
- Q_STEP_T
User authorization Block parameters
- BA_EN bit 18
- Each row of the list box represents
an IEPAR_ block which is
interconnected at input EPE_CONN.
User authorization Block parameters
- BA_EN bit 18
- Each list box represents an insertion
material or a material yield.
Function Manual, 03/2009, A5E02171101-01
SIMATIC BATCH Interface Blocks V7.1